Cooling Maintenance

Kellam Home Services Signature Multipoint Cooling/HVAC Reliability & Safety Inspection

Over the course of the year, your air conditioning system collects dust and debris, which reduces its efficiency and can lead to higher energy bills. Without regular A/C tune-ups and maintenance, your heat pump or air handler is far more likely to fail—often at the worst possible time. We’re here to make sure that doesn’t happen.

Book Now – (888) 713-3163

A precision inspection and cleaning helps your HVAC system operate more efficiently, reducing energy usage and costs. It’s one of the best ways to ensure your home stays cool, comfortable, and worry-free through the warm months.

Here’s What to Expect

At Kellam Home Services, the safety of you, your family, and your home is always our highest priority. During your Maintenance & Safety Inspection, your technician will review all safety-related findings with you and note any maintenance needed for maximum efficiency, comfort, reliability, and longevity.

Your service technician will complete a 50-point inspection of your cooling system, typically taking about an hour.

This includes, but is not limited to:

• Inspect air filtration system
• Run test to verify proper sequence of operation
• Check refrigeration system performance, including:
  • Refrigerant level
  • Temperatures / pressures & other associated refrigeration parameters
  • Investigate any improper restrictions, or low refrigerant levels if/when found
• Flush drain
• Inspect electrical connections, wiring harness & disconnect (as applicable)
• Inspect the contactor for integrity, improper resistance, pitting or burning.
• Measure and document electrical parameters, such as
  • Incoming voltage
  • Amp draw of blower motor
  • Amp draw of compressor
  • Amp draw of the outdoor fan motor
  • Investigate any improper resistance that may be found in the electrical circuit.
• Inspect capacitor(s) for integrity, corrosion and capacitance
• Inspect readily accessible ducts for integrity, cleanliness, and/or obvious air leaks
• Inspect blower for proper / adequate air flow.
  • Includes Inspection of wheel, motor (& lubricate as needed)
• Vacuum loose debris from the blower cabinet
• Wipe clean the reachable areas of the unit cabinet
• Inspect indoor coils for obstructions and/or cleanliness
• Inspect outdoor coils for obstructions leaks and/or cleanliness.
• Replace filter if/when provided by the customer while on-site at the time of inspection
• Check and calibrate thermostat as required
• Inspect both the indoor and outdoor units for loose or worn parts and abnormal vibrations
• Test and adjust the unit for peak operating efficiency

Your Kellam Home Services Maintenance & Safety Inspection meets the manufacturer’s requirements for an annual inspection by a licensed contractor. It also ensures you’re kept informed about any additional maintenance that may be needed to keep your system running safely, reliably, and efficiently for years to come.