Electrical Panel Upgrade in Virginia Beach, VA
Serving Hampton Roads Since 1995
Book An Appointment
Kellam makes it easy! Schedule an appointment online and our experts will be there when you need us.
Our Services
Cooling
Heating
Plumbing
Electrical
Generators
Maintenance
Your electrical panel is the heart of your home’s wiring, and it was sized for the way people lived when it was installed. Today’s homes run EV chargers, heat pumps, larger kitchens, and more electronics. Kellam Home Services provides an electrical panel upgrade in Virginia Beach, VA, along with full panel installation, so your home has the capacity and safety it needs.
Signs Your Electrical Panel Is Outdated
- Fuses instead of breakers
- A 60 or 100 amp service in a home that uses a lot of power
- Lights that dim when large appliances start
- Breakers that trip often or feel hot
- No open slots for new circuits
- Rust, scorch marks, or a buzzing sound from the panel
Panel Installation and Upgrade Services
Service Upgrades From 100 to 200 Amps
A 200 amp service is the common standard for modern homes. It gives you headroom for an EV charger, a new HVAC system, or a kitchen remodel without overloading the service.
Full Panel Replacement
Circuit breaker panel installation replaces worn breakers, corroded bus bars, and unsafe equipment. It also gives you labeled, accessible circuits and room for future additions.
Subpanels for Additions and Garages
When your main panel is full, a subpanel can feed a garage, workshop, addition, or pool equipment without rewiring the whole house.
Why More Virginia Beach Homes Need More Capacity
Homeowners in Virginia Beach are adding EV chargers, replacing older air conditioners with high-efficiency heat pumps, and building out garages and pools in areas like Sandbridge and Pungo. A new cooling system can add real load to your panel, so it is smart to check capacity before the install.
Permits, Inspections, and Dominion Energy
Panel replacement is a permitted job. The work is typically inspected by the City of Virginia Beach, and Dominion Energy may need to disconnect and reconnect power at the meter. A professional handles that coordination, so you do not have to chase down each step.
Older Homes in Bayside, Thalia, and Great Neck
Houses from the 1960s and 1970s often came with 100 amp panels, and some of them used brands with known safety concerns. Salt air near the Oceanfront can also corrode panels mounted outdoors or in garages. If you live in an older home and have never had your panel evaluated, a visit can tell you where you stand.
An upgrade should look at the whole picture: the meter base, the service entrance cable, grounding, and available breaker space. A larger panel does not help if the service entrance feeding it is undersized.
What to Expect on Panel Upgrade Day
- We review the plan, permit, and scope with you beforehand.
- Power to the home is shut off while the old panel is removed.
- The new panel is installed, circuits are labeled, and everything is tested.
- The inspection is scheduled, and power is restored once approved.
Electrical Panel Upgrade Questions Answered
Do I need a 200 amp panel?
Not always. Homes with gas heat and modest electrical loads may be fine on 100 amps. If you plan to add an EV charger, electric heat, or an addition, 200 amps is often the better long-term choice.
How long will the power be off during a panel upgrade?
Plan for several hours, and sometimes most of the day. The timing depends on the home, the new equipment, and utility coordination.
What affects the cost of a panel upgrade?
Panel size, the condition of the existing wiring, the service entrance, the distance to the meter, and permit requirements all play a part. A visit lets us explain what applies to your home.
Can I add an EV charger with my current panel?
Maybe. A Level 2 charger typically needs a dedicated 240 volt circuit, and many older panels are already near capacity. An evaluation shows whether you need an upgrade.
Are Federal Pacific and Zinsco panels really a problem?
Both have documented concerns, including breakers that may not trip when they should. If you have either brand, getting it evaluated is a smart safety step.
How is a panel upgrade different from replacing a breaker?
A breaker replacement swaps one worn part. A panel upgrade replaces the whole distribution center. See our breaker replacement page for when a single breaker will do.
Does a panel upgrade affect my homeowners insurance?
Some insurers ask about panel brands and ages, and an upgrade can resolve those questions. Check with your insurer, and keep your permit and inspection records.
Is electrical work around water heaters or AC part of this?
It can be. Both appliances use dedicated circuits, and a new unit may call for a new breaker or a larger panel. See our water heater installation page for planning a replacement.
WE'VE GOT YOU COVERED
Preferred Partner Plans
Whether it’s a plumbing, HVAC, or electrical maintenance, repair or replacement, our knowledgeable, courteous and certified technicians get it done right the first time! When you become a member of the Preferred Partner Plan, we reward your loyalty to us with some pretty awesome benefits! You’ll receive:
- Priority Service every time you call: Our Preferred Partner Plan members are coded with priority upon calling and always go to the front of the list. Since we only offer a limited number of plans, you can be assured that you will get service faster.
- Discount of 15%. Preferred members get 15% off of standard book prices for all services. They also receive 15% off on parts and labor.
- Free HVAC, Electrical and Plumbing home inspections. Our comprehensive HVAC inspections are completely free. Likewise, our thorough Plumbing Inspections are free of charge, all a part of the perks of being a Preferred Partner Plan member. This ensures that your equipment is running reliably and safely.
- Special email coupons and campaigns. Throughout the year we offer special services, tips and offers just for our Preferred Partner Plan members.