Heating Maintenance

Serving Hampton Roads Since 1995

Book An Appointment

Kellam makes it easy! Schedule an appointment online and our experts will be there when you need us.

Our Services

Keep Your Home Comfortable This Winter with Kellam Home Services

At Kellam Home Services, we’re committed to keeping your home warm and cozy throughout the colder months. Our skilled technicians provide top-quality service to help your heating system operate at its best.

Need quality heater maintenance? Call Kellam Home Services at (757) 204-6797 today to schedule your tune-up.

The Importance of Heating Maintenance

Routine heating maintenance is essential for comfort, efficiency, and safety. A system that’s well cared for operates more efficiently—helping lower your energy costs—while also reducing the risk of breakdowns or safety hazards.

Heating maintenance includes:

  • Checking all components to ensure proper operation
  • Replacing parts and filters if needed
  • Ensuring no safety issues

Time for a heating system checkup? Contact Kellam Home Services at (757) 204-6797 to book a full maintenance service in Richmond.

When Should You Service Your Heater?

Most heating system manufacturers recommend having your furnace, heat pump, or boiler serviced once a year—ideally in late summer or early fall—so it’s ready before the first cold front arrives.

A fall tune-up helps prevent mid-winter breakdowns, improves efficiency, identifies safety concerns early, and helps maintain your warranty.

Expert Heating Maintenance

At Kellam Home Services, the safety of you, your family, and your home is always our top priority. During your Maintenance & Safety Inspection, your technician will review all safety-related findings and identify any maintenance needed to keep your system running efficiently, comfortably, and reliably for the long term.

We perform a 36-point inspection of your heating system, which takes about an hour to complete and includes, but is not limited to:

  • Inspect air filtration system
  • Run test to verify proper sequence of operation
  • Check for safe combustion
    • Flame rollout / hard ignition / back pressure
    • Carbon Monoxide
    • Gas pressure(s)
    • Temperature rise – ensure within manufacturer specifications
    • Test for gas leaks
  • Clean the flame sensor
  • Inspect the heat exchanger for corrosion, cracks, pinholes, deformities or carbon/soot.
  • Inspect gas valve for corrosion, restriction of gas flow, and abnormal noise
  • Inspect vent connectors for integrity, pitch, obstructions and leaks
  • Inspect furnace controls and safety devices for integrity & proper operation
  • Flush drain (90%+ efficient units only)
  • Inspect electrical connections, wiring harness & disconnect (as applicable)
  • Measure and document electrical parameters, such as
    • Incoming voltage
    • Amp draw of blower motor
    • Amp draw of inducer motor
    • Amp draw of Compressor (heat pump only)
    • Amp draw of Electric backup heater (heat pump only)
    • Investigate any improper resistance that may be found in the electrical circuit.
  • Inspect capacitor(s) for integrity, corrosion and capacitance
  • Inspect readily accessible ducts for integrity, cleanliness, and/or obvious air leaks
  • Inspect blower for proper / adequate air flow.
    • Includes Inspection of wheel, motor (& lubricate as needed)
    • Check for cleanliness of indoor coil and secondary heat exchanger
    • Check for cleanliness of the outdoor coil (heat pumps only)
  • Vacuum loose debris from the blower and burner compartments
  • Wipe clean the reachable areas of the unit cabinet
  • Replace filter if/when provided by the customer while on-site at the time of inspection
  • Check and calibrate thermostat as required
  • Inspect the entire furnace/boiler for loose or worn parts and abnormal vibrations
  • Test and adjust the unit for peak operating efficiency
  • Check defrost cycle and reversing valve operation (heat pumps only)
  • Check the crankcase heater for proper maintenance (heat pumps only)
  • Check refrigerant level (heat pumps only)
  • Check emergency heat systems for proper operation (heat pumps only)

Your Kellam Home Services Maintenance & Safety Inspection meets manufacturer requirements for an annual inspection by a licensed contractor. It also ensures you’re aware of any maintenance that may be needed to keep your system running safely, reliably, and efficiently for years to come.

Prepare for the cold with Kellam Home Services—call (757) 204-6797 to schedule your appointment.

Heating and Cooling Maintenance

WE'VE GOT YOU COVERED

Preferred Partner Plans

Whether it’s a plumbing, HVAC, or electrical maintenance, repair or replacement, our knowledgeable, courteous and certified technicians get it done right the first time! When you become a member of the Preferred Partner Plan, we reward your loyalty to us with some pretty awesome benefits! You’ll receive:

  • Priority Service every time you call: Our Preferred Partner Plan members are coded with priority upon calling and always go to the front of the list. Since we only offer a limited number of plans, you can be assured that you will get service faster.
  • Discount of 15%. Preferred members get 15% off of standard book prices for all services. They also receive 15% off on parts and labor.
  • Free HVAC, Electrical and Plumbing home inspections. Our comprehensive HVAC inspections are completely free. Likewise, our thorough Plumbing Inspections are free of charge, all a part of the perks of being a Preferred Partner Plan member. This ensures that your equipment is running reliably and safely.
  • Special email coupons and campaigns. Throughout the year we offer special services, tips and offers just for our Preferred Partner Plan members.

Americans with
Disabilities Act (ADA) Notice

At Kellam Mechanical, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (757)430-0358; or email us at csrleads@kellammechanical.com and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you